3 Mistakes to Avoid When Installing Security Film
Installing safety window films may seem
like a cakewalk however, for most of individual, this is not the case in
real life scenario. The truth is that some professional skills will be
required for the installation to be done in the correct manner. When the
anti shatter glass film is done in a proper way and the most effective
manner, besides being a great utility product, they can also be
aesthetically appealing. On the other hand, if is not done by an expert,
there can be several serious mistakes. This will be evident in the
appearance and most importantly, the performance will also get affected.
An observant person will be able to learn from the mistakes made by
others during the installation process. By doing so, you can accomplish
your installation goals without encountering the most common blunders.
With that being said, let’s look at the most common mistakes that you
can be avoided during the installation.
I. Failure to make a neat
cleaning of the window before initiating the project. It is a wise
decision to apply the security window film only after making sure that
the window is clean and essentially spotless. Inability to do so will
lead to a window that cannot be cleaned at all unless the film is
entirely removed. If that is not enough, the film might not be able to
stick to the dirty glass for a an extended period of time and this will
greatly reduce its effectiveness.
II. Cleaning window glass with alcohol or other chemicals. Most of the professional film installers know for sure that all windows are required to get cleaned by using hot water or mild liquid soap before film installation. Application of alcohol or any other chemical may leave a residue on the glass surfaces, making it difficult for the film to adhere to it.
III. Failing to eliminate air bubbles and water contents. Generally, a security film is applied on a wet window and the next step is to squeeze it to remove water and air bubbles under it (if any). If this is not properly done, the film might find it difficult to stick to the window.
Consider this blog post and make use of the best anti shatter window film in the market.
II. Cleaning window glass with alcohol or other chemicals. Most of the professional film installers know for sure that all windows are required to get cleaned by using hot water or mild liquid soap before film installation. Application of alcohol or any other chemical may leave a residue on the glass surfaces, making it difficult for the film to adhere to it.
III. Failing to eliminate air bubbles and water contents. Generally, a security film is applied on a wet window and the next step is to squeeze it to remove water and air bubbles under it (if any). If this is not properly done, the film might find it difficult to stick to the window.
Consider this blog post and make use of the best anti shatter window film in the market.
Comments
Post a Comment